Insight... Expertise... Results.

CONTACT INFO
  • Address: 4400 Town Center, Southfield, MI 48075-1104 USA
  • Phone: 1-248-358-3570
  • Email: memberinfo@aiag.org

Adding to Cart Adding to Cart...

Quality Publication Listing

  • 7-Step Problem Solving Process for TH&E Suppliers

    Product Code: THE-4

    The Seven-Step Problem-Solving Process provides a comprehensive checklist of actions to be considered for each of the steps or phases of developing corrective and preventive actions to a problem.

    Version: 1   Publication Date: Jul, 2000
  • Advanced Product Quality Planning and Control Plan

    Product Code: APQP

    APQP and Control Plan provide a process to reduce the complexity of product quality planning for suppliers and customers, and allows organizations to easily communicate product quality planning requirements to suppliers.

    Version: 2   Publication Date: Jul, 2008
  • AIAG & VDA FMEA Handbook

    Product Code: FMEAAV-1

    The AIAG & VDA FMEA Handbook is the new automotive industry reference manual for Failure Mode and Effects Analysis; it will be used as a guide to assist suppliers in developing Design FMEA, Process FMEA, and Supplemental FMEA for Monitoring and System Response. Developed with a global team of OEM and Tier 1 Subject Matter Experts (SMEs), it incorpo...

    Version: 1st edition, 2nd printing   Publication Date: Aug, 2022
  • AIAG Traceability Guideline

    Product Code: CQI-28

    Traceability provides product visibility throughout the supply chain, greatly reducing the amount of product and/or vehicles needing recall due to a non-conformance. AIAG's Traceability Guideline is a single, consistent application guideline for traceability, highlighting best practices and showcasing applications/case studies of the latest technol...

    Version: 1   Publication Date: Dec, 2018
  • Automotive Warranty Management

    Product Code: CQI-14-4

    Automotive Warranty Management: A Guideline for Industry Best Practices. Guideline drives consumer satisfaction and warranty improvement by providing a robust warranty management program. The guideline provides an assessment tool, and No Trouble Found case studies to guide an organization to proactively reduce warranty incident rates associated wi...

    Version: 4   Publication Date: Apr, 2022
  • Best Practice: Unified Procedure for App of Rubber & Plastic

    Product Code: D-22

    The primary focus of this document is to present a unified procedure for approval of rubber and plastic formulation ingredient changes. Where ingredients must be changed due to commercial and/or regulatory issues and does not require PPAP testing.

    Version: 1   Publication Date: Mar, 2005
  • Best Practices in Supply Chain Product Development

    Product Code: D-11

    This document focuses on the business aspects of the AutoSTEP pilot, which has examined the business processes used in product data exchange and identified best practices for product development through the supply chain. Product Description Problem Areas Business Case Templates References

    Version: 1   Publication Date: Jul, 1998
  • Cost of Poor Quality Guide

    Product Code: CQI-22

    Most companies typically waste up to 35% of their operating budgets doing things less efficiently than possible or by failing to capitalize on opportunities. The Cost of Poor Quality Guide will help you identify and quantify where inefficiencies exist, effectively communicate these deficiencies to upper management, and prioritize the actions needed...

    Version: 1   Publication Date: Oct, 2012
  • Defining Product Data Quality

    Product Code: D-12

    This report is the first step in a project to develop reference documents that provide guidance for improving product data quality throughout the supply chain.

    Version: 1   Publication Date: Jun, 1999
  • Design Review Based on Failure Modes (DRBFM Reference Guide)

    Product Code: CQI-24

    The DRBFM Reference Guide is intended to provide information and examples of procedures to implement DRBFM proficiency expectations at all levels of engineering and management. The DRBFM document also aligns with the SAE J2886 DRBFM Recommended Practice.

    Version: 1   Publication Date: Aug, 2014
  • Design Review Based on Failure Modes and SAE J2886

    Product Code: SAEJ2886-K

    The DRBFM manual describes the basic principles and implementation of the DRBFM process and how it is integrated within the product and process development cycle. The DRBFM manual also provides descriptions and examples of the four steps of the process and their specific advantages and limitations, and guidance of how the analysis is to be carried...

    Version:   Publication Date: Mar, 2013
  • ECM Recommendation - Engineering Change Request (ECR)

    Product Code: D-30

    Provides an overview of the fundamental principles and key phases of the ECR reference process.

    Version: 1   Publication Date: Jan, 2009
  • Effective Error-Proofing

    Product Code: CQI-18

    Effective Error-Proofing is a comprehensive guideline on how to implement change within an organization by moving away from detection oriented quality practices, toward a culture of zero error.

    Version: 1   Publication Date: Mar, 2011
  • Effective Problem Solving Guide

    Product Code: CQI-20-2

    Does your organization need help eliminating repeat problems and implementing sustainable improvements in your products or processes? This guideline supports organizational efforts to develop and implement a robust problem solving process that will improve problem descriptions, team member participation, qualitative methods for problem solving, and...

    Version: 2   Publication Date: Aug, 2018
  • Engineering Change Management (ECM) Recommendation

    Product Code: D-29

    A global recommendation on Management Strategies for Engineering Changes.

    Version: 1   Publication Date: Jan, 2009
  • Engineering Change Management (ECM) Reference Process

    Product Code: XD-D-26

    Reference document that supports AIAG's D-29 (Engineering Change Management, ECM Recommendation) and D-30 (ECM Recommendation Engineering Change Request ECR), Engineering Change Management Documents.

    Version: 1 Edition, 2nd Printing   Publication Date: Jan, 2009
  • FMEA for Tooling & Equipment (Machinery FMEA)

    Product Code: MFMEA

    This manual supports the machinery (the term machinery as used in this manual applies to tooling and equipment also) design process from design development through design approval.

    Version: 2   Publication Date: Jun, 2012
  • Guidance on Statistical Techniques for ISO 9001:2000

    Product Code: I10017-03

    ISO/TR 10017:2003 is not intended for contractual, regulatory or certification/registration purposes. It is not intended to be used as a mandatory checklist for compliance with ISO 9001:2000 requirements. The justification for using statistical techniques is that their application would help to improve the effectiveness of the quality management sy...

    Version: 2   Publication Date: May, 2003
  • Guidelines for Auditing Management Systems

    Product Code: I19011-18

    ISO 19011:2018 provides guidance on auditing management systems, including the principles of auditing, managing an audit program and conducting management system audits, as well as guidance on the evaluation of competence of individuals involved in the audit process. These activities include the individual(s) managing the audit program, auditors an...

    Version: 3   Publication Date: Jul, 2018
  • IATF 16949

    Product Code: IATF-1

    This standard, coupled with the applicable customer-specific requirements, defines the quality management system requirements for automotive production, service and/or accessory parts. IATF 16949:2016 is an autonomous QMS standard that is fully aligned with the structure and requirements of ISO 9001:2015. However, it is not a stand-alone document,...

    Version: 1   Publication Date: Oct, 2016
  • IATF 16949 7 Pack

    Product Code: IATF7-K

    Set includes the latest editions of the IATF 16949, the RULES 5th Edition, and the Core Tools manuals: APQP, PPAP, AIAG & VDA FMEA Handbook, MSA, & SPC.

    Version:   Publication Date: Jan, 1
  • IATF 16949 Rules for Certification Scheme

    Product Code: RULES-5

    This document contains the Rules for achieving and maintaining IATF recognition related to IATF 16949. Now in its 5th Edition, the document is commonly referred to as "Rules 5th". It includes the criteria for certification body recognition, certification body audit process, certification body auditor qualifications, and IATF 16949 certificates. Th...

    Version: 5   Publication Date: Nov, 2016
  • IATF 16949/ISO 2 Pack

    Product Code: IATF-1-K

    This bundle contains the IATF 16949 and ISO 9001:2015.

    Version:   Publication Date: Jan, 1
  • IATF 16949:2016 Memory Jogger - Desktop Guide

    Product Code: IATFMD-1

    The IATF 16949 Memory Jogger is a reference to answer many questions regarding IATF 16949:2016 and its background, rules, and implementation/maintenance strategies. Concepts are presented in a brief, focused format that discusses IATF 16949 clauses in conversational language. The Guide is applicable to employees at all levels of an IATF 16949 cer...

    Version: 1   Publication Date: Jan, 2017
  • IATF 16949:2016 Memory Jogger - Pocket Size

    Product Code: IATFMP-1

    The IATF 16949 Memory Jogger is a reference to answer many questions regarding IATF 16949:2016 and its background, rules, and implementation/maintenance strategies. Concepts are presented in a brief, focused format that discusses IATF 16949 clauses in conversational language. The Guide is applicable to employees at all levels of an IATF 16949 cer...

    Version: 1   Publication Date: Jan, 2017
  • IATF Auditor Guide for IATF 16949

    Product Code: TSG-4

    Now in its 4th edition, the IATF Auditor Guide has been updated to include additional essential auditor competency requirements, such as audit nonconformity management and auditing top management processes. The document is organized in three distinct sections: The first and second sections outline the 32 audit steps and are divided into Stage 1 Rea...

    Version: 4   Publication Date: May, 2019
  • Information Technology. Radio Frequency Identification

    Product Code: I18046-12

    Information Technology. Radio Frequency Identification Device Performance Test Methods. Part 3:Test Methods for Tag Performance. ISO/IEC 18046-3:2012 defines test methods for performance characteristics of RFID tags for item management, and specifies the general requirements and test requirements for tags which are applicable to the selection of...

    Version: 2   Publication Date: Aug, 2012
  • ISO 9001:2015 QMS - Requirements

    Product Code: I9001-15

    ISO 9001:2015 specifies requirements for a quality management system when an organization. Needs to demonstrate its ability to consistently provide products and services that meet customer and applicable statutory and regulatory requirements. Aims to enhance customer satisfaction through the effective application of the system, including processes ...

    Version: 5   Publication Date: Sep, 2015
  • Layered Process Audit Guideline

    Product Code: CQI-8

    The CQI-8 guideline integrates LPA with management of Key Performance Indicators (KPIs) resulting in LPAs having a positive impact on business results. Other highlights include recommendations for expanding ownership beyond the Quality function, suggesting roles of the LPA Planning Team, promoting utilization of LPAs in non-manufacturing areas (e.g...

    Version: 2   Publication Date: Jan, 2014
  • Long Term Archiving & Retrieval of Digital Product

    Product Code: D-36

    Long Term Archiving & Retrieval of Digital Product Definition Data - Format Recommendation - In today's OEM and supplier companies, storing product definition information has moved to computer based digital management systems. Unfortunately, up to this point there has been no alignment between organizations on storage media, data architecture, aut...

    Version: 1   Publication Date: Aug, 2014
  • MBE Wallchart

    Product Code: D-38

    The AIAG MBE Roadmap Wallchart provides companies; their partners and suppliers a visual means to assess current capabilities and measure their progress from a Level 1- 2D drawing centric environment towards a comprehensive Level 4 - "Model Based Enterprise". The Wall Chart identifies the key aspects of drawing/model usage to determine your current...

    Version: 1   Publication Date: Feb, 2016
  • Measurement Systems Analysis

    Product Code: MSA-4

    Measurement data is used in nearly every manufacturing process. As the quality of the data improves, the quality of decisions improves. This guide will help you assess the quality of your measurement systems, providing a basis for recognizing where improvements can be made. The result is knowledge that can be used to improve your measurement pro...

    Version: 4   Publication Date: Jun, 2010
  • Part 7: Parameters for Active Air Interface Communications

    Product Code: I180007-14

    Information Technology - Radio Frequency Identification for Item Management - Part 7: Parameters for Active Air Interface Communications at 433 MHz. ISO/IEC 18000-7:2014 defines the air interface for radio frequency identification (RFID) devices operating as an active RF tag in the 433 MHz band used in item management applications. It provides a...

    Version: 4   Publication Date: Sep, 2014
  • Potential Failure Mode & Effects Analysis

    Product Code: FMEA-4

    FMEA methodology is used to identify potential failure modes before they occur, allowing for the implementation of controls that drive the highest quality in product design and manufacturing. The AIAG FMEA 4th Edition handbook clarifies questions concerning the technical development of Design and Process FMEAs. Please note: this handbook explai...

    Version: 4   Publication Date: Jun, 2008
  • Production Part Approval Process

    Product Code: PPAP-4

    PPAP is the industry standard that defines the production part approval process and demonstrates engineering design records and specification requirements are achieved by the supplier's manufacturing process. The PPAP guideline provides the minimum expectations a supplier must document and submit to a customer for approval to ship production part ...

    Version: 4   Publication Date: Mar, 2006
  • QMS 3-Pack

    Product Code: QMS3-K

    This bundle contains a copy of 1 each of the IATF-1, RULES-5 and I9001-15.

    Version:   Publication Date: Jan, 1
  • Quality Management - Quality of an Organization

    Product Code: I9004-18

    ISO 9004:2018 gives guidelines for enhancing an organization's ability to achieve sustained success. This guidance is consistent with the quality management principles given in ISO 9000:2015. ISO 9004:2018 provides a self-assessment tool to review the extent to which the organization has adopted the concepts in this document. ISO 9004:2018 is app...

    Version: 4   Publication Date: Apr, 2018
  • Quality Management Systems - Fundamentals and Vocabulary

    Product Code: I9000-15

    ISO 9000:2015 describes the fundamental concepts and principles of quality management which are universally applicable to the following. Organizations seeking sustained success through the implementation of a quality management system. Customers seeking confidence in an organization's ability to consistently provide products and services conformi...

    Version: 4   Publication Date: Sep, 2015
  • Quality Management Systems - Guidelines For Quality Plans

    Product Code: I10005-18

    Quality management - Guidelines for quality plans. This document gives guidelines for establishing, reviewing, accepting, applying and revising quality plans. This document is applicable to quality plans for any intended output, whether a process, product, service, project or contract, and any type or size of organization. It is applicable whethe...

    Version: 3   Publication Date: Jun, 2018
  • Quality Measurement Data Specification

    Product Code: D-25

    Based on XML, the standard will enable gages to seamlessly exchange all types of quality information, including SPC and MSA studies to different tools.

    Version: 1   Publication Date: Apr, 2007
  • Road Vehicles - Functional Safety - Part 1: Vocabulary

    Product Code: I26262-1-18

    This document defines the vocabulary of terms used in the ISO 26262 series of standards.

    Version: 2   Publication Date: Dec, 2018
  • Road Vehicles - Functional Safety - Part 10

    Product Code: I26262-10-18

    The Road Vehicles - Functional Safety - Part 10: Guidelines On ISO 26262 document provides an overview of the ISO 26262 series of standards, as well as giving additional explanations, and is intended to enhance the understanding of the other parts of the ISO 26262 series of standards. It has an informative character only and describes the general c...

    Version: 2   Publication Date: Dec, 2018
  • Road Vehicles - Functional Safety - Part 11

    Product Code: I26262-11-18

    The Road Vehicles - Functional Safety - Part 11: Guidelines On Application Of ISO 26262 To Semiconductors document has an informative character only. It contains possible interpretations of other parts of ISO 26262 with respect to semiconductor development. The content is not exhaustive with regard to possible interpretations, i.e., other interpret...

    Version: 1   Publication Date: Dec, 2018
  • Road Vehicles - Functional Safety - Part 12

    Product Code: I26262-12-18

    The Road Vehicles - Functional Safety - Part 12: Adaptation Of ISO 26262 For Motorcycles document specifies the requirements for adaptation for motorcycles, including the following: -- general topics for adaptation for motorcycles; -- safety culture; -- confirmation measures; -- hazard analysis and risk assessment; -- vehicle integra...

    Version: 1   Publication Date: Dec, 2018
  • Road Vehicles - Functional Safety - Part 2

    Product Code: I26262-2-18

    The Road Vehicles - Functional Safety - Part 2: Management Of Functional Safety document specifies the requirements for functional safety management for automotive applications, including the following: -- project-independent requirements with regard to the organizations involved (overall safety management), and -- project-specific requiremen...

    Version: 2   Publication Date: Dec, 2018
  • Road Vehicles - Functional Safety - Part 3: Concept Phase

    Product Code: I26262-3-18

    This document specifies the requirements for the concept phase for automotive applications, including the following: -- item definition; -- hazard analysis and risk assessment; and -- functional safety concept. Annex A provides an overview on objectives, prerequisites and work products of this document.

    Version: 2   Publication Date: Dec, 2018
  • Road Vehicles - Functional Safety - Part 4

    Product Code: I26262-4-18

    The Road Vehicles - Functional Safety - Part 4: Product Development At The System Level document specifies the requirements for product development at the system level for automotive applications, including the following: -- general topics for the initiation of product development at the system level; -- specification of the technical safety ...

    Version: 2   Publication Date: Dec, 2018
  • Road Vehicles - Functional Safety - Part 5

    Product Code: I26262-5-18

    The Road Vehicles - Functional Safety - Part 5: Product Development At The Hardware Level document specifies the requirements for product development at the hardware level for automotive applications, including the following: -- general topics for the product development at the hardware level; -- specification of hardware safety requirements;...

    Version: 2   Publication Date: Dec, 2018
  • Road Vehicles - Functional Safety - Part 6

    Product Code: I26262-6-18

    The Road Vehicles - Functional Safety - Part 6: Product Development At The Software Level document specifies the requirements for product development at the software level for automotive applications, including the following: -- general topics for product development at the software level; -- specification of the software safety requirements;...

    Version: 2   Publication Date: Dec, 2018
  • Road Vehicles - Functional Safety - Part 7

    Product Code: I26262-7-18

    The Road Vehicles - Functional Safety - Part 7: Production, Operation, Service And Decommissioning document specifies the requirements for production, operation, service and decommissioning, including related planning activities. Annex A provides an overview on objectives, prerequisites and work products of this document.

    Version: 2   Publication Date: Dec, 2018
  • Road Vehicles - Functional Safety - Part 8

    Product Code: I26262-8-18

    The Road Vehicles - Functional Safety - Part 8: Supporting Processes document specifies the requirements for supporting processes, including the following: -- interfaces within distributed developments; -- overall management of safety requirements; -- configuration management; -- change management; -- verification; -- documentatio...

    Version: 2   Publication Date: Dec, 2018
  • Road Vehicles - Functional Safety - Part 9

    Product Code: I26262-9-18

    The Road Vehicles - Functional Safety - Part 9: Automotive Safety Integrity Level (ASIL)-Oriented And Safety-Oriented Analyses document specifies the requirements for Automotive Safety Integrity Level (ASIL)-oriented and safety-oriented analyses, including the following: -- requirements decomposition with respect to ASIL tailoring; -- criteri...

    Version: 2   Publication Date: Dec, 2018
  • SASIG Digital Engineering Visualization

    Product Code: D-21

    Document identifies what Digital Engineering Visualization is, and how it can be utilized. Implementing the tools and processes in this guideline will help enable global engineering collaboration and standards within the worldwide automotive industry.

    Version: 1   Publication Date: Aug, 2005
  • SASIG Long Term Archiving & Retrieval of Digital Product

    Product Code: D-37

    The SASIG Long Term Archiving & Retrieval (LTAR) Project developed a set of recommendations to guide companies to implement effective and efficient archival and retrieval practices. The recommendations are partitioned into four topic areas: 1) Format, 2) Process, 3) Time Period, and 4) Quality Assurance. This document addresses the set of proce...

    Version: 1   Publication Date: Dec, 2015
  • SASIG Long Term Archiving and Retrieval (LTAR)

    Product Code: D-34

    This document contains an assessment of the current state of LTAR and the future vision within the auto industry. Includes the necessary tools to identify tasks, deliverables, and work stream timelines for projects.

    Version: 1   Publication Date: Jul, 2011
  • Service Production Part Approval Process (Service PPAP)

    Product Code: SVPPAP-1

    Service Production Part Approval Process (Service PPAP) is a supplement to Production Part Approval Process (PPAP) 4th edition. This document identifies PPAP requirements for all service parts. These requirements are intended to be clarifications to the PPAP process for service parts and not additional requirements.

    Version: 1   Publication Date: Jun, 2014
  • SPC QuickStart Guide

    Product Code: CQI-25

    The new CQI-25 SPC Quick Start Guide is a supplement to the full SPC Manual and provides the building blocks of statistical process control for those who are new to the topic or have only experienced SPC from a limited perspective. The Quick Start Guide covers about 90 percent of the full manual's SPC applications in a succinct format with text and...

    Version: 1   Publication Date: Mar, 2015
  • SPC Short Run Supplement

    Product Code: CQI-26

    The SPC Short Run Supplement (CQI-26) guideline was developed to address the particular uniqueness of short run production, where suppliers do not have the production volume to readily apply the approaches identified in the SPC Reference Manual, 2nd Edition. Providing easy to understand examples of commonly used short run charts, the SPC Short Ru...

    Version: 1   Publication Date: Feb, 2016
  • Special Process: Brazing System Assessment

    Product Code: CQI-29

    The new Brazing System Assessment specifies process requirements for an organization or its suppliers performing applicable aluminum and stainless steel brazing. Processes covered are CAB, Vacuum, Flame, and Induction brazing, and contain requirements for part print, control plan, braze quality inspection & reports, parameter documentation, mainten...

    Version: 1   Publication Date: May, 2021
  • Special Process: Casting System Assessment

    Product Code: CQI-27

    The CQI-27 Special Process: Casting System Assessment provides requirements for foundry suppliers of OEM automotive castings. It is a collective effort by OEM and Tier 1 customers to create common process requirements for foundries, requirements which our shared experiences tell us will benefit the foundry industry for their OEM automotive customer...

    Version: 2   Publication Date: Mar, 2018
  • Special Process: Coating System Assessment 3rd Edition

    Product Code: CQI-12-3

    The new CQI-12 Special Process: Coating System Assessment was developed to help better evaluate quality systems at coating shops supplying OEM automotive coatings. Now in its third edition, the Coating System Assessment has been updated and revised for greater clarity, and to include the ISO 9001:2015 and IATF 16949:2016 Quality Management System c...

    Version: 3   Publication Date: Jul, 2020
  • Special Process: Electronic Assembly Manufacturing-Soldering

    Product Code: CQI-17-2

    The goal of the 2nd edition CQI-17 Special Process: Electronic Assembly Manufacturing - Soldering System Assessment (EAM-SSA) is the development of a soldering management system that provides for continual improvement - emphasizing process control, proactive defect prevention, and the reduction of variation and waste in the supply chain. These sold...

    Version: 2   Publication Date: Aug, 2021
  • Special Process: Heat Treat System Assessment 4th Edition

    Product Code: CQI-9-4

    The CQI-9 4th Edition is a comprehensive audit covering the most common heat treat processes employed by the automotive industry. Intended to provide a common approach to a heat treat management system for automotive production and service part organizations, the 4th edition now includes additional best practices, along with new and modified requir...

    Version: 4   Publication Date: Jun, 2020
  • Special Process: Plating System Assessment

    Product Code: CQI-11

    Learn the process requirements your organization needs to follow to develop a plating management system that provides for continual improvement, emphasizing defect prevention and the reduction of variation and waste in the supply chain. Application of this process will allow you to meet regulatory requirements and identify areas of improvement whi...

    Version: 3   Publication Date: Sep, 2019
  • Special Process: Welding System Assessment

    Product Code: CQI-15-2

    Intended to provide a common approach to a welding management system for automotive production and service part organizations, this document specifies process requirements for an organization or its suppliers performing applicable ferrous and non-ferrous metallic welding. Now in its second edition, numerous updates have been made including the addi...

    Version: 2nd edition, 2nd printing   Publication Date: Jan, 2020
  • Statistical Process Control

    Product Code: SPC-3

    Continuous improvement is vital to prospering in today's economy. This guide provides several basic and advanced statistical methods that can be used to make your manufacturing improvements more effective, resulting in products and services that improve value to both you and your customer.

    Version: 2   Publication Date: Jul, 2005
  • Sub-Tier Supplier Management Process Guideline

    Product Code: CQI-19

    Improve product quality and lower cost with the Sub-Tier Supplier Management Process Guideline. Developed to address common issues in the industry, this guideline defines the minimum quality-related requirements for Sub-Tier suppliers and provides explicit guidance on effective identification and control of Pass Through Characteristics (PTC). It al...

    Version: 1   Publication Date: Aug, 2012
  • Sub-Tier Supplier Management Process, Readiness Checklist

    Product Code: CQIA-19

    AIAG has released a common supplier management process developed by tier 1 automotive suppliers for use with tier 2 suppliers (CQI-19). It focuses on current automaker concerns, e.g. "pass through" characteristics, risk management, quality involvement in sourcing selection from the pre-selection phase through launch to production monitoring, escal...

    Version: 1, 2nd Printing   Publication Date: Feb, 2016
  • Supplier & Product Reliability Assurance

    Product Code: D-32

    A comprehensive set of reliability tools and process to manage product development and supplier assessment.

    Version: 1   Publication Date: Sep, 2011
  • Supplier Electronic Network Connectivity

    Product Code: D-33

    Document identifies existing/emerging telecommunication and network options, including: verify/summarize current OEM supply chain management business processes, and EDI and CAD/CAE/CAM connectivity requirements/specifications.

    Version: 1   Publication Date: Mar, 2011
  • Supplier Quality Requirements 5-Pack

    Product Code: CT5-K

    Set includes the latest editions of the Core Tool manuals: APQP, PPAP, AIAG & VDA FMEA Handbook, MSA and SPC in English

    Version:   Publication Date: Jan, 1
  • Special Process: Rubber Processing System Assessment

    Product Code: CQI-30

    CQI-30 Special Process: Rubber Processing System Assessment - Mixing & Molding 1st Edition. Developed in collaboration with industry experts from OEMs, Tier 1 suppliers, and molding suppliers, the CQI-30 Special Process: Rubber Processing System Assessment - Mixing & Molding provides a common approach to a rubber mixing and molding management syste...

    Version: 1   Publication Date: Aug, 2022
  • Special Process: Molding System Assessment

    Product Code: CQI-23-2

    AIAG's Molding System Assessment is a common process approach to control molding processes and a methodology to evaluate and amend, as needed, current processes. The assessment provides best practices for continual improvement, emphasizing defect prevention and the reduction of variation and waste in the supply chain. The CQI-23 includes the asses...

    Version: 2   Publication Date: Feb, 2023
Adding to Cart
Loading …
Adding to Cart Adding Item to Cart ...